2007 ARVOR 20 SERIES II for sale AUD $49,000

Marine / Boats / Power

arvor 20 series ii 578024 001 arvor 20 series ii 578024 002
arvor 20 series ii 578024 003 arvor 20 series ii 578024 004
arvor 20 series ii 578024 005 arvor 20 series ii 578024 006
arvor 20 series ii 578024 007 arvor 20 series ii 578024 008
CALL +61299681222
Title 2007 ARVOR 20 SERIES II
Make ARVOR
Price AUD $49,000
Listing Type Used
Stock Number S259
Refcode TA866469
Usage Family
Hull Material Fibreglass
Hull Mono
Length - metres 6.1
Length - feet 20

Just Listed - 2007 Arvor 20 Series II - The Perfect family weekend getaway vehicle! For a review on this cracker model pls cut and paste this link into your URL

https://www.youtube.com/watch?v=kPTnww5zTZQ

Arvor Boats has stood almost alone in Australia for nearly 20 years with its fibreglass semi-planning hulls running diesel shaft-drives. Shaft-driven vessels are the obvious choice for serious seafarers, originally with steam power before that was overtaken by diesel.

Safe and efficient diesel power began in the early 20th century and really took hold of modern shipping in the 1960s. Despite that, there have been few serious attempts to blend the many advantages of diesel power and shaft drive into planning hulls for the recreational market. Arvo saw the niche and its European-designed boats have been filling the void ever since.

The unique Arvor design was imported into Australia by Collins Marine in Sydney in late 1998. Frank Collins established the company in 1978, distributing Renault marine engines that morphed into Nanni Diesel in 1983. Franks son, Peter, joined the company in 1984 and added the range of Arvor Boats. This worked hand in hand with Nanni engines, continuing the success of the thriving company.


THE ARVOR 20 - The History

Collins Marine dipped a toe in the market and imported two boats one fully finished demo model, and a fibreglass shell to be used as a plug for moulds destined for local production. A manufacturing deal had been reached and Collins Marine contracted a young Nowra boatbuilder named Paul Kennedy to commence construction. Collins sent him to Europe to inspect the manufacturing and assembly process and gain full product training.

Peter says that after initial costings they financed the relationship. When Paul asked about the desired quantities Peters confident response was: "Well tell you when to stop!"

That relationship continued for 12 years, until the GFC took its toll. They held out with local production until 2011, when the economics no longer made sense. Plus, the full Arvor range was coming on line, including the popular 23ft and 25ft boats, the latter still a current model. While some were imported with engines, those without were mostly fitted with Nanni diesels here.

There were other shaft-drive boats on the market, particularly displacement hulls and ski boats, but the Arvor 20 was really the first commercially available production semi-planing hull to gain true recreational acceptance. South Australias Nereus hulls used the same concept but whilst they were quite popular in local waters, particularly amongst commercial fishermen, they never gained the acceptance of the Arvors, nor did they have the modern appeal.


DIESEL SHAFT-DRIVE

Arvor 20s offered many design features that were quite ahead of their time, featuring fully enclosed hardtops that are now everywhere. Over the production run Arvor released Series 1, 2 and 3, originally with the 85hp, five-cylinder turbo 2.5L Nanni diesel delivering 19-20kt wide-open throttle and an efficient planing cruise of around 14-15kt burning 10L/h. At trolling speeds you get four to five litres per hour, making the package a fuel efficient long-range contender with its 80-litre fuel capacity, combined with all of the advantages of longevity and safety provided by the diesel.

Later Series 3 models were upgraded to the 100hp Nanni, returning a WOT speed around 21 knots, while the range was extended with an additional 55-litre fuel tank. The propeller is protected by a tunnel hull and requires minimal maintenance.

The cockpit of the Arvor 20 is huge and freeboard is quite reasonable, making it an ideal day boat for fishing, diving or cruising. The smallish berths allow limited overnighting and the cabin is a little compact due to the full walk-around decks either side. However, all these features combine in an excellent and very workable package that is especially suited to mooring.

Later examples also feature Hydrive hydraulic steering and a Lewmar anchor winch.


WHERE ARE THEY NOW?

Arvor Boats sold just under 200 packages in Australia from 1998 until 2010 when it was replaced by the new 215AS the offset cabin is named the Asymmetrical Hull. Purchasers were generally intelligent boaters who saw the advantages, safety and longevity of the design. Many were kept on moorings but just as many stayed on trailers. The hull is a genuine 20ft (6.096m) while the 2.48m beam is under the 2.5m limit and hence suitable for trailering. Dry hull and motor weight is quoted around 1500kg for an expected combined towing weight well under 2500kg even with a galvanised trailer and full load.

High quality low-volume products such as the Arvor 20 will always provide excellent residual value. Many secondhand packages are still fetching prices similar to their original purchase if you can find an owner willing to part with their pride and joy.

Arvor has gone from strength to strength in Australia and the boats are now produced by the huge Brunswick Corporation. They are still produced in Europe and distributed here through Collins Marine, with outboard or shaft-drive alternatives. A strong body of intelligent boaties still demand shaft-driven diesel power in semi-planing hulls and Arvor has little competition in this segment.


SPECS

Arvor 20 Series II


Hull: Moderate-V monohull

Material: GRP and vinylester resin

LOA: 6.096m

Beam: 2.48m

Draft: 0.65m

Weight: 1500kg

Fuel capacity: 80L

Engine: Nanni 5.250TDI

Type: Five-cylinder

Rated hp: 85hp@2,800rpm

Displacement: 2.5L

Weight: 285kg \

Inquire today for more details. This boat will simply not last.

Inspection by appointment only as boat is located offsite but only 10 mins from our office !

Happy Boating

The information contained within classified listings on Tradeaboat.co.nz is generated by the private and dealer advertisers. Please confirm listing details including price and specifications directly with the seller.
CALL +61299681222
Email Dealer
Dealer Address
SBM Sales Sydney

81 Parriwi Rd, Mosman, NSW, 2088
Australia